PRODUCTS · ONE MANUFACTURER, SIX HARDWARE LINES
Every charging speed, from one manufacturer.
3.7 kW to 320 kW, AC to DC — every Predixon charger runs the same ChargeOS platform underneath. See how each one performs in the field on the Solutions page.
AC Chargers
AC Portable Charger
A Mode 2 portable charger that turns any 32 A CEE socket into a 22 kW three-phase charging point — no wall box, no installation. Selectable 16 A / 32 A, AC + DC leakage protection and plug temperature monitoring in an IP66 / IK10 housing.
Up to 22 kW · Type 2 · 5 m cable | CEE 32 A + Schuko adapter
Field use: homes without a wall box, workshops, depots & temporary sites
AC Wall Box
A compact wall-mounted AC charger with a tethered single-socket cable and a simple status display — built for straightforward, everyday charging in homes, workplaces and depots where a slim footprint matters.
42 × 37 cm · Tethered connector · RFID card activation
Field use: home, workplace & depot charging
Pro-Charge Smart 22
A compact wall charger built for a single driveway or garage, running the same Digital Axon predictive-maintenance core used in our fleet-grade hardware — so a home charger inherits factory-level reliability instead of a stripped-down version of it.
Up to 22 kW · Type 2 | Charging window — 3–10 hrs
Field use: home & residential charging
4-Outlet AC Charging Station
Charges four vehicles from a single footprint with smart power distribution, paired with session-based billing and remote health monitoring for workplaces, retail and hospitality sites.
4 vehicles at once | Access — RFID · QR
Field use: workplace, retail & hospitality
OmniPlug MC-11
Charges up to 11 vehicles from a single 121 kW installation with dynamic load management — built for fleet depots that need to cycle every vehicle on a schedule.
11 vehicles · 121 kW total
Field use: fleet & depot operations
DC Chargers
Mobile SC
A wheeled, impact-rated DC unit that covers overflow bays or temporary sites without new construction — the mobile complement to OmniPlug in depot operations.
30 kW portable DC · IP54/IK10
Field use: fleet & depot operations
DC Wall Box
The same 30 kW DC platform as Mobile SC, fixed to a wall or pedestal mount for permanent installations — a stationary option where units don’t need to move between bays.
30 kW DC · IP54/IK10
Field use: fixed depot & facility installations
Pro-Charge DC Series
Modular 120–320 kW output from a dual-CCS2 head with smart power sharing, so a station scales from a single 120 kW unit to a five-rack 320 kW corridor stop by adding power modules — not by replacing hardware.
120–320 kW · dual CCS2 | Peak current — 500 A · 96.5%+ efficiency
Field use: highway & fast-charging corridors
Power Block & Dispenser
Separates the power electronics from the dispensing point, so an operator installs shared power infrastructure once and adds dispensers in phases as demand grows — turning a forecourt into an energy hub in stages instead of one large upfront build. (This site-scalable architecture is moving from engineering into first customer installs.)
Modular AC/DC | Enclosure — IP54 · field-ready
Field use: forecourt & energy-hub conversions
Want to see these on-site, not on a spec sheet?
The Solutions page shows each of these six products solving the specific problem of the site it’s installed in.